大家好,今天小编关注到一个比较有意思的话题,就是关于decompression error abort的问题,于是小编就整理了4个相关介绍decompression error abort的解答,让我们一起看看吧。
u盘装win7系统出现decompression?
Decompression error Abort的意思是解压错误,终止。而出现这种错误的原因通常有两个,ghost文件损坏或者系统分区出现错误。一般来说,ghost文件损坏是出现这种错误最常见的原因,至于分区出错,可以使用分区工具检测出来。
一、ghost文件损坏损坏可以直接重新下载。
二、系统分区出现错误的解决办法:1、将准备好的快启动u盘启动盘插到电脑上,然后重启电脑,等待出现品牌logo后按启动快捷键进入启动菜单,用键盘上的方向键将光标移动到U盘启动项。3、进入分区工具界面后,依次点击“硬盘-还原分区表”。4、在弹出的窗口中,选择备份分区表所在的路径,点击“打开”。5、在弹出的窗口中,点击“是”按钮即可。
用U盘装系统进度条加到一半就弹出decompressionerror?
U盘安装XP系统时出现:“decompression error abort”意思是说:解压缩错误而被中止,也就是说U盘中的镜像文件在解压缩安装的过程中出现错误而被中止,也就是说U盘中的镜像文件很可能已经损坏.
(1) 造成这样的原因是: 这是在下载ISO还原镜像文件过程中丢失了文件,也就是说没有完整的下载成功,所以才会出现在还原的过程中弹出镜像文件出错的对话框,建义在“系统之家”重新下载ISO镜像文件,不管是WIN7 ,XP,WIN8,下载完后,用MD5进行文件完整性的检证,当检证所有的下载码都对了,这才代表下载的镜像文件完整的下载成功,这样再来还原镜像,就一定成功。
(2)MD5检证的方法如下:一般都是通过一个软件“Hash_V1.04_MD5校验工具”进行校验,通常在下载系统的网站都会提供一个系统的MD5校验码,下载完后,直接把系统拖入MD5校验工具中,检验工具会自己进行计算验证,等一会儿在窗口出现一个编码,然后把这个编码去对比检验码,一对比,就知道下载的系统是否丢失数据文件(也就是镜像文件是否损坏)。(如下图)
电脑用u***还原中出现错误1808取消后继续安装,然后系统就崩坏了?
Question:(1808)Decompressionerror,Abort?的意思就是解压错误,终止。
原因分析:
1、ghost文件损坏;
2、系统分区出现错误。
解决方案:
1、重新下载ghost镜像文件,再次安装;
2、用diskgenius或者easybcd修复分区表后在重新安装试试。
3、若上述方案无法解决,则需要进入BIOS将硬盘的连接模式修改成AHCI保存并退出后再重装一次系统。具体步骤如下:
①开机点击delete或F2键进bios;
②找到AdVanced——SATAConfiguration项,把后面的模式更改成AHCI模式;
③按下F10保存退出;
④重新安装系统。
电脑格式化完c盘之后安装不了系统,求助?
重装系统的时候出现Decompression error,Abort一般是你安装的系统文件损坏或者硬盘分区主引导损坏导致的。
一、在PE中打开分区工具Disk Genius,点硬盘点重建主引导MBR。
二、检查C盘是否设置主活动分区三、重新下载操作系统镜像
到此,以上就是小编对于decompression error abort的问题就介绍到这了,希望介绍关于decompression error abort的4点解答对大家有用。